HGM® Basalt
Basalt Fiber for Asphalt Reinforcement
High-performance Mineral Fiber for Asphalt
Since 2002, we have specialized in concrete crack resistance, waterproofing, and anti-corrosion technologies.
Discover Superior Asphalt Fiber
PIONEER® HGM® Basalt – Chopped Basalt Fiber for Pavements
Overview
PIONEER® HGM® Basalt is a premium basalt fiber solution for asphalt reinforcement. Designed for demanding road and pavement applications, this basalt fiber reinforced asphalt product improves structural integrity, enhances durability, and resists deformation under heavy loads. With superior heat and chemical resistance, basalt fiber reinforced asphalt concrete offers an environmentally friendly alternative for infrastructure development.
Key Benefits
-
Enhanced Durability: Reduces cracking, rutting, and fatigue in basalt fiber reinforced asphalt pavements, extending service life.
-
Superior Heat Resistance: Withstands high temperatures, making it ideal for hot mix asphalt applications.
-
Environmentally Friendly: Derived from natural basalt rock fiber, ensuring sustainability in construction projects.
-
Improved Flexibility: Provides added elasticity, improving the load-bearing capacity of fiber reinforced asphalt mixtures.
-
Chemical and UV Resistance: Resists environmental degradation, ensuring long-lasting performance in bituminous fiber applications.
Product Description
PIONEER® HGM® Basalt is made from 100% basalt mineral, specifically designed as a monofilament fiber for asphalt reinforcement. PIONEER® HGM® Basalt is made from basalt minerals melted at 1500°C and then spun into continuous fibers that are cut into short lengths. It is an environmentally friendly asphalt reinforcement material that improves the adhesion, high temperature stability and fatigue life of asphalt pavements. It also improves low temperature crack resistance and helps prevent reflective cracking. This makes it an effective solution for addressing asphalt pavement durability issues and premature damage, ultimately extending the service life of asphalt surfaces.
PIONEER® is a leading brand in the engineering fiber industry with a 22-year history. Its fiber-reinforced concrete technology has been awarded the National Science and Technology Progress Award of China. The PIONEER® product line includes four main series: HPM® Microfibers, HTM® Macrofibers, HGM® Asphalt Fibers and PNE® Steel Fibers. These products have been successfully applied in thousands of major projects worldwide and are highly regarded in the field of civil engineering.
Uses
PIONEER® HGM® Basalt is used in the intermediate and surface layers of asphalt pavements to improve overall performance, extend pavement life, and reduce long-term maintenance costs. Applications for PIONEER® HGM® Basalt include:
New asphalt pavement surfaces;
Overlays on old asphalt pavements, existing concrete pavements, or bridge decks;
Asphalt pavement maintenance and repair;
Steel bridge deck overlays;
Large asphalt pavements such as airports and parking lots;
Asphalt concrete surfaces with various grades (e.g., SMA, AC, LH);
Asphalt concrete surfaces under; various conditions, including hot mix asphalt, hot mix asphalt, and patching;
Descrição do produto
PIONEER® HGM® PAN é feito de poliacrilonitrila 100% pura e é projetado especificamente como uma fibra monofilamentar para reforço de asfalto. Adicionar PIONEER® HGM® PAN a misturas de asfalto melhora a adesão, estabilidade em alta temperatura e durabilidade à fadiga. Ele também melhora a resistência a rachaduras em baixa temperatura e previne rachaduras reflexivas, tornando-o uma solução eficaz para lidar com problemas de durabilidade de pavimentos de asfalto e danos precoces, e para estender a vida útil de superfícies de asfalto.
A PIONEER® é uma marca líder na indústria de fibras de engenharia com 22 anos de história. Sua tecnologia de concreto reforçado com fibras recebeu o Prêmio Nacional de Progresso em Ciência e Tecnologia da China. A linha de produtos PIONEER® inclui quatro séries principais: Microfibras HPM®, Macrofibras HTM®, Fibras de Asfalto HGM® e Fibras de Aço PNE®. Esses produtos foram aplicados com sucesso em milhares de grandes projetos em todo o mundo e são altamente considerados no campo da engenharia civil.
Usos
PIONEER® HGM® PAN é normalmente usado nas camadas intermediárias e superficiais de pavimentos asfálticos para melhorar o desempenho geral, estender a vida útil do pavimento e reduzir os custos de manutenção de longo prazo. As aplicações do PIONEER® HGM® PAN incluem:
Novas superfícies de pavimento asfáltico
Sobreposições em pavimentos de asfalto antigos, pavimentos de concreto existentes ou tabuleiros de pontes
Manutenção e reparação de pavimentos asfálticos
Revestimento para tabuleiros de pontes de aço
Pavimentos asfálticos de grande porte, como os de aeroportos e estacionamentos
Superfícies de concreto asfáltico com várias gradações (por exemplo, SMA, AC, LH)
Superfícies de concreto asfáltico sob diversas condições, incluindo asfalto misturado a quente, asfalto misturado morno e remendos
PIONEER® FIBER
22 Years, 1000+ Projects
PIONEER® Fiber Cases
Municipal roads in Tarim Oilfield, Xinjiang
Product Advantages
PIONEER® HGM® Basalt offers higher strength and modulus of elasticity, along with excellent UV resistance and weatherability. It enhances pavement performance by improving high-temperature stability, low-temperature crack resistance, water resistance, and fatigue durability.
-
Higher strength and modulus of elasticity for better asphalt pavement toughness
-
Excellent UV resistance and weatherability
-
Ultra-fine fibers, providing a higher number of fibers per ton of asphalt mix
-
Improved dispersion and reinforcement within the asphalt mix
-
Increased oil content in the mix, enhancing adhesion strength and stability of the asphalt pavement
-
Enhanced toughness and low-temperature crack resistance of the asphalt mix
-
Reduced permanent deformation and improved resistance to wear
-
Minimized impact of moisture on the pavement, enhancing water stability
Compliance and Certification
-
ASTM D7552：Standard Specification for Fiber-Reinforced Asphalt Concrete
-
AASHTO M320：Standard Specification for Performance-Graded Asphalt Binder
-
ASTM D8079：Standard Specification for Performance-Graded Asphalt Binder Using Ground Tire Rubber (GTR) and Other Additives
Physical Properties
-
Specific Gravity：2.63
-
Material：basalt
-
Fiber Type：Monofilament mineral fiber
-
Diameter：0.0008 in.（0.02 mm）
-
Nominal Length：0.25，0.5 in.（6，12 mm）
-
Tensile Strength： 3000 MPa
-
Modulus of Elasticity： 86 - 90 GPa
-
Melt Point：600°C
-
Alkali, Acid, and Salt Resistance：High
-
UV Resistance: Excellent
-
Elongation：3.1%
-
Color：Brown
Addition Rates
The application of PIONEER® HGM® Basalt in asphalt pavements is based on traffic volume. For highways, major roads, urban expressways, and bridge decks, the recommended dosage is 1kg per ton of asphalt mix.
Construction
-
Raw Materials: There are no special requirements for raw materials when adding PIONEER® HGM® Basalt to asphalt mixes.
-
Mixing Process: The mixing process for asphalt mixes with PIONEER® HGM®Basalt is essentially the same as for those without it.
-
Construction Procedure: The construction procedures for asphalt mixes with PIONEER® HGM® Basalt are identical to those without it.
-
Compaction: Asphalt mixes with PIONEER® HGM® Basalt require 3-4 additional passes during compaction to achieve a density of 98% or more.
Packaging
PIONEER® HGM® Basalt is available in a variety of packaging options，For custom packaging, please reach out to a PIONEER® sales representative.
Technical Proposal
PIONEER® HGM® Basalt meets the ASTM D7552: Standard Specification for Fiber-Reinforced Asphalt Concrete. Contact a PIONEER® fiber expert today to request a technical proposal for your project. Please fill out the form below; we assure you that all your information will be kept confidential.
Contact Us
+1 (929) 569-9989
+86 151 6240 5106
+86 136-4517-7333
+86 151-6240-5106
Reference
Background on the application of polymer fibers in asphalt pavements:
-
ASTM D7954："Standard Specification for Fiber-Reinforced Asphalt Mixtures"
-
AASHTO M320："Standard Specification for Performance-Graded Asphalt Binder"
-
EN 12697-1:2021： “Bituminous mixtures - Test methods”
Background on the application of aramid fibers in asphalt pavements:
-
ASTM D8395-23： "Standard Specification for Aramid Fiber for Asphalt Mixtures"
Trusted Asphalt Reinforcement Fibers Supplier
Direct from the Manufacturer, Quality Guaranteed
As a trusted manufacturer with 22 years of expertise, we offer various asphalt reinforcement fibers to meet specific project needs, including aramid fiber, basalt fiber, polyester fiber, polyacrylonitrile fiber. Furthermore, we also offer microfibers, macrofibers, fiberglass fibers, and steel fibers for concrete reinforcement. With proven applications across thousands of projects worldwide, PIONEER® reinforcement fibres are becoming global buyers’ top choice.
PIONEER® delivers reliable high-performance concrete fibers and asphalt fibers for construction reinforcement solutions. Our commitment to strict quality control, customized product solutions, and flexible OEM/ODM partnerships ensures that clients receive the highest-quality fibers at competitive prices. Supported by dedicated technical support and customer service, we empower our clients to achieve exceptional results in every application.
PIONEER® Headquarters
26,500m² production base
Advanced fiber dispersibility
Exceptional tensile strength
22 Years of Asphalt Fiber Reinforcement Expertise
Advanced Solutions for Your Next Projects
Trusted Solutions From PIONEER®
PIONEER® HGM® Basalt delivers unmatched reinforcement for asphalt applications, offering a robust and sustainable solution for modern infrastructure needs. Its innovative basalt fiber reinforced asphalt technology ensures longer-lasting, more resilient roads and pavements.
Basalt Fiber Applications
-
Road and Highway Construction: Strengthens basalt fiber reinforced asphalt concrete to handle high traffic loads and extreme weather.
-
Pavement Repair and Overlays: Reinforces basalt fiber pitch in worn pavements, enhancing structural integrity.
-
Specialty Projects: Ideal for airport runways, heavy-load industrial pavements, and urban infrastructure requiring chopped basalt fiber reinforcement.
Physical Properties
-
Material：basalt
-
Fiber Type：Monofilament mineral fiber
-
Diameter：0.0008 in.（0.02 mm）
-
Nominal Length：0.25，0.5 in.（6，12 mm）
-
Tensile Strength： 3000 MPa
-
Modulus of Elasticity： 86 - 90 GPa
-
Melt Point：600°C
-
Alkali, Acid, and Salt Resistance：High
-
UV Resistance: Excellent
-
Addition Rates: 1-3 kg per ton of asphalt mix
-
Compliance: ASTM D7552- Fiber-Reinforced Asphalt Concrete
For custom requirements, tailored technical advice is available to ensure optimal project outcomes.
Why Choose Us?
Proven Expertise & Greater Savings
22 years of focus
on fiber reinforcement solutions.
5,000 tons yearly
from advanced manufacturing.
20+ countries served
with global product distribution.
1,000 projects proven
in diverse applications worldwide.
Looking for a Quote or More Information about Our Fibers?
At PIONEER, we’re committed to delivering the best and most relevant information to support your needs. Reach out to us for more details and discover the benefits we offer:
-
Factory-Direct Pricing
-
Expert Guidance on Fiber Applications
-
Customized Solutions for Your Project
-
Fiber Samples Available for Testing
Privacy Assurance: We respect your privacy and will never share your information.
Email Us
If you need product customization, want to join our global distribution network, or are interested in OEM/ODM partnerships, email: Sales@pioneerfibre.com.
For technical support on fiber conversion design, fiber reinforced solution, fiber testing request, and fiber application guide, email: Support@pioneerfibre.com.