PNE® SS-9054
Smooth Steel Fibers
Steel Fibers for Concrete
Since 2002, we have specialized in concrete crack resistance, waterproofing, and anti-corrosion technologies.
PIONEER® FIBER
22 Years, 1000+ Projects
PIONEER® Fiber Cases
Nanjing Dashengguan High-speed Railway Bridge
Product Advantages
PIONEER® PNE® SS-9054 is a structural reinforcement material for concrete and shotcrete, with the following key features:
-
Provides a three-dimensional reinforcement system for concrete
-
Eliminates the need for welded wire reinforcement (WWR) and small-diameter rebar as secondary reinforcement
-
Replaces or partially replaces traditional reinforcement in concrete
-
Enhances concrete's crack resistance, ductility, energy absorption, and toughness
-
Improves impact resistance, fatigue resistance, and shear strength of concrete
-
Reduces shrinkage and settlement cracking in concrete
-
Shortens construction time for floor slabs by eliminating the need to place, cut, and position traditional rebar
-
Supports sustainable construction practices
-
Ideal for use in pumped or shotcrete applications
Compliance and Certification
-
Meets ASTM A820/A820M, Type II chopped fibers
-
Meets ASTM C1116/C1116M, Type I fiber-reinforced concrete
Physical Properties
-
Material: Steel
-
Density: 7.85
-
Fiber Type: Smooth steel wires
-
Length: 2.12inches (54mm)
-
Equivalent Diameter: 0.024inches (0.6mm)
-
Aspect Ratio: 90
-
Tensile Strength: 150ksi (1020 MPa)
Addition Rates
The dosage of PIONEER® PNE® SS-9054 will vary depending on the application type and project performance requirements. The standard recommended dosage for PIONEER® PNE® SS-9054 is 25 to 75 pounds per cubic yard (15 to 45 kilograms per cubic meter) of concrete. For specific dosage recommendations based on your application and project needs, please contact your PIONEER® representative for technical support.
Packaging
PIONEER® PNE® SS-9054 is packaged in 55-pound (25-kilogram) polyethylene-lined paper bags, making it easy to handle and use.
Shelf Life and Storage Conditions
The product has a shelf life of 5 years when stored in dry conditions.
Pallets should be protected from rain and snow. Do not stack pallets on top of each other.
Technical Support
PIONEER® PNE® SS-9054 complies with ACI 544.4R-18 - Guide to Design with Fiber-Reinforced Concrete and ACI 506.1R-08 - Guide to Fiber-Reinforced Shotcrete. These guides provide detailed information on design methods, material selection, construction practices, and performance evaluation for fiber-reinforced concrete, including steel fiber-reinforced concrete.
PIONEER®'s fiber experts will assist you in developing a technical plan using steel fibers. Fill out the form below to receive a detailed report that will help address your project design and fiber selection needs. We guarantee that all your information will be kept confidential.
Reference
-
ACI 544.4R-18 - Guide to Design with Fiber-Reinforced Concrete
-
ASTM C1609/C1609M - Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
-
EN 14889-1:2006 - Fibres for Concrete – Part 1: Steel Fibres – Definitions, Specifications and Conformity
-
EFNARC - Specification and Guidelines for Fibre-Reinforced Sprayed Concrete
-
ACI 506.1R-08 - Guide to Fiber-Reinforced Shotcrete
Contact Us
+1 (929) 569-9989
+86 151 6240 5106
+86 136-4517-7333
+86 151-6240-5106
Product Description
PIONEER® PNE® SS-9054 Wave Steel Fibers are made from high-strength, fine, straight steel wires and are designed for reinforcing concrete structures. This product offers significant cost benefits with only a small dosage required. Its linear shape ensures even distribution within the concrete, enhancing strength and durability. Additionally, it improves crack resistance, bending toughness, ductility, fatigue resistance, and shear strength. With excellent corrosion resistance, it is suitable for various concrete environments.
PIONEER® is a leading brand in the engineering fiber industry with a 22-year history. Its fiber-reinforced concrete technology has been awarded the China National Science and Technology Progress Award. The PIONEER® product line includes four main series: HPM® Micro Fibers, HTM® Macro Fibers, HGM® Asphalt Fibers, and PNE® Steel Fibers. These products have been successfully applied in thousands of major projects worldwide and are highly regarded in the civil engineering field.
Uses
PIONEER® PNE® SS-9054 can serve as a safe and straightforward alternative to wire mesh and rebar for various ready-mix and precast concrete applications. It is recommended for use in the following concrete structures:
-
Industrial flooring, commercial flooring
-
Residential foundations, basement walls
-
Sidewalks, sub-base layers
-
Tunnel precast segments, tunnel final linings
-
Massive concrete structures
-
Surface layers, footings/foundations
-
Precast elements
-
Shotcrete
Discover Superior Steel Fiber Reinforcement
PIONEER® PNE® SS-9054 – Corrugated Steel Fiber
Overview
PIONEER® PNE® SS-9054 is a high-quality corrugated steel fiber designed to significantly enhance the performance of steel fiber reinforced concrete (SFRC). Made from premium steel, these fibers are engineered for optimal performance across a variety of concrete applications, providing superior reinforcement against cracking, impact, and wear. The corrugated design improves bonding with the concrete mix, ensuring enhanced durability and strength in demanding environments.
Key Benefits
-
Superior Steel Fiber Reinforcement: Our steel fibers offer excellent reinforcement for concrete, improving tensile strength and ductility.
-
Crack Resistance: These fibers control cracks, enhancing the concrete’s durability and resistance to shrinkage and thermal cracking.
-
Versatile Applications: Perfect for fiber reinforced concrete, especially in high-stress applications such as industrial floors, pavements, and precast concrete.
-
Cost-Effective Solution: Reduces reliance on traditional reinforcement like rebar and steel mesh, delivering cost-effective results without compromising quality.
-
Long-Term Durability: Highly resistant to wear, impact, and corrosion, ensuring concrete lasts longer even in harsh conditions.
Trusted Steel Fibers Supplier
Direct from the Manufacturer, Quality Guaranteed
As a trusted manufacturer with 22 years of expertise, we offer various steel fibers to meet specific project needs, including crimped steel fiber, hooked-end steel fiber, corrugated steel fiber, glued end-hooked steel fiber, copper-coated micro steel fiber, and brass micro steel fiber, With proven applications across thousands of projects worldwide, PIONEER® steel fibres are becoming global buyers’ top choice.
PIONEER® delivers reliable high-performance steel fibers for fiber concrete reinforcement solutions. Our commitment to strict quality control, customized product solutions, and flexible OEM/ODM partnerships ensures that clients receive the highest-quality fibers at competitive prices. Supported by dedicated technical support and customer service, we empower our clients to achieve exceptional results in every application.
PIONEER® Headquarters
26,500m² production base
Advanced fiber dispersibility
Exceptional tensile strength
22 Years of Steel Fibers Reinforcement Expertise
Advanced Solutions for Your Next Projects
Trusted Solutions From PIONEER®
PIONEER® brings 22 years of expertise to steel fiber concrete reinforcement, delivering high-quality metal fibers and steel fiber reinforced concrete solutions directly from the manufacturer. Recognized globally for performance and reliability, our superior steel fibers meet the demands of modern construction projects.
Steel Fibers Applications
PIONEER® PNE® Steel Fiber can serve as a safe and simple alternative to metal mesh and rebar in various ready-mix and precast applications. It is recommended for use in the following concrete structures:
-
Industrial and warehouse floors
-
Commercial slab construction
-
Concrete pavements
-
White topping and overlays
-
Thin-walled precast concrete
-
Shotcrete
-
Composite metal decking
Physical Properties
-
Material: High-strength steel
-
Type: Straight steel fiber
-
Length Options: Available in various lengths (30mm, 50mm, etc.)
-
Diameter: 0.9mm
-
Tensile Strength: 650MPa
-
Standard Dosage: 15-45 kg/m³
-
Compliance: ASTM A820/A820M, Type II chopped fibers and ASTM C1116/C1116M, Type I fiber-reinforced concrete
For custom requirements, tailored technical advice is available to ensure optimal project outcomes.
Why Choose Us?
Proven Expertise & Greater Savings
22 years of focus
on fiber reinforcement solutions.
5,000 tons yearly
from advanced manufacturing.
20+ countries served
with global product distribution.
1,000 projects proven
in diverse applications worldwide.
Looking for a Quote or More Information about Our Fibers?
At PIONEER, we’re committed to delivering the best and most relevant information to support your needs. Reach out to us for more details and discover the benefits we offer:
-
Factory-Direct Pricing
-
Expert Guidance on Fiber Applications
-
Customized Solutions for Your Project
-
Fiber Samples Available for Testing
Privacy Assurance: We respect your privacy and will never share your information.
Email Us
If you need product customization, want to join our global distribution network, or are interested in OEM/ODM partnerships, email: Sales@pioneerfibre.com.
For technical support on fiber conversion design, fiber reinforced solution, fiber testing request, and fiber application guide, email: Support@pioneerfibre.com.